Is your LG washer not draining? This common issue can be frustrating.
But don’t worry, there are solutions to get your washer back in working order. A washer that won’t drain can cause laundry delays and inconvenience. The problem might be due to a clogged drain hose, a malfunctioning pump, or a blocked filter.
Understanding the reasons behind the issue can help you fix it quickly. We’ll explore the possible causes and offer simple troubleshooting steps. Whether you’re a DIY enthusiast or just need a quick fix, this guide will help you solve the draining problem and keep your laundry routine on track. Let’s dive in and get your LG washer draining properly again.
Common Causes
If your LG washer is not draining, it can be frustrating. Understanding the common causes can help you fix the issue quickly. Here, we will discuss two main reasons why your washer might not be draining properly.
Clogged Drain Hose
A clogged drain hose is a frequent cause of drainage problems. Over time, lint, dirt, and other debris can build up in the hose. This blockage can prevent water from flowing out. Check the hose for any kinks or obstructions.
Here are steps to check and clean the drain hose:
- Turn off and unplug the washer.
- Locate the drain hose at the back of the machine.
- Disconnect the hose and inspect it for any blockages.
- Use a long brush or similar tool to clear any debris.
- Reconnect the hose and test the washer.
Blocked Pump Filter
The pump filter traps debris and prevents it from entering the pump. When this filter gets blocked, it can stop the washer from draining. Regularly checking and cleaning the pump filter can prevent this issue.
Follow these steps to clean the pump filter:
- Turn off and unplug the washer.
- Locate the pump filter access panel, usually at the bottom front of the washer.
- Open the panel and place a shallow container underneath to catch any water.
- Unscrew the filter and remove it.
- Clean the filter under running water and remove any debris.
- Replace the filter and close the panel.
By addressing these common causes, you can often resolve drainage issues with your LG washer. Regular maintenance can keep your washer running smoothly.
Tools Needed
Having the right tools is crucial for fixing an LG washer that is not draining. Being prepared with the necessary equipment can save time and reduce stress. Below is a list of essential tools you will need.
Basic Toolkit
A basic toolkit is essential for any repair job. It should include a flathead screwdriver, a Phillips screwdriver, and pliers. These tools are useful for opening panels and removing screws. Keep a wrench handy too, as you might need to tighten or loosen bolts.
Bucket And Towels
A bucket and towels are necessary to manage water spills. Place the bucket under the washer to catch any water that drains out. Use towels to wipe up any excess water and keep the area dry. This will help in preventing slips and falls.
Safety Precautions
When dealing with an LG washer that is not draining, safety must come first. This ensures you avoid potential hazards. Follow these essential safety precautions before starting any troubleshooting or repair work.
Unplug The Washer
Always unplug the washer from the electrical outlet. This prevents any risk of electric shock. Make sure your hands are dry before touching the plug. If the plug is hard to reach, switch off the circuit breaker.
Turn Off Water Supply
Locate the water supply valves behind the washer. Turn them clockwise to shut off the water. This step prevents any water damage or flooding. Check both hot and cold water lines to ensure they are off.
Following these steps will help you safely inspect and fix your LG washer. Stay safe and proceed with caution.
Inspecting The Drain Hose
An Lg washer not draining can be a headache. One common cause is a problem with the drain hose. This section will guide you through the process of inspecting the drain hose to ensure it’s working properly.
Locating The Hose
First, you need to find the drain hose. It is usually at the back of the washer. Look for a flexible tube attached to the machine. This tube carries water out of the washer.
Make sure the washer is unplugged before starting. Safety comes first. Pull the washer away from the wall to get a clear view.
Checking For Blockages
Blockages can stop water from draining. To check for blockages, disconnect the hose. Place a bucket under the hose to catch any water. Use a flashlight to look inside the hose.
If you see any debris, use a long object to remove it. A coat hanger can work well for this. Be gentle to avoid damaging the hose. Once clear, reconnect the hose and run a short cycle to test.
Check where the hose connects to the washer and the drain. Both ends should be clear and secure. Even a small blockage can cause draining issues.
Regularly inspecting and maintaining the drain hose can prevent future problems. Keep your washer running smoothly with these simple steps.
Cleaning The Pump Filter
If your LG washer is not draining, the pump filter might be blocked. Cleaning the pump filter can solve this issue. This easy task can help maintain your washer’s performance.
Accessing The Filter
First, turn off and unplug your washer. Locate the filter access panel at the bottom front of the washer. Open the panel by pressing it. You may need a flat-head screwdriver to open the panel.
Removing Debris
Place a towel or shallow container under the filter cap. Slowly turn the filter cap counter-clockwise. Pull out the filter. Remove any debris, lint, or small objects. Rinse the filter under running water.
Check the filter housing for any remaining debris. Wipe it clean with a damp cloth. Once clean, reinsert the filter and tighten the cap. Close the access panel securely. Plug the washer back in and turn it on.
Cleaning the pump filter can help your LG washer drain properly. Regular maintenance can prevent future problems. Always consult your user manual for specific instructions.
LG Washer Not Draining? [Here is Checking The Drain Pump]
Is your LG washer not draining? A clogged or faulty drain pump might be the cause. Checking the drain pump can help you identify and fix this issue quickly. Follow these steps to ensure your washer runs smoothly again.
Identifying The Pump
First, locate the drain pump on your LG washer. You can find it at the bottom of the washer, near the front. Remove the access panel to see the pump clearly. Look for a small motor with hoses attached.
Testing The Pump
Next, test the pump to see if it works properly. Disconnect the washer from power before starting. Check the pump for any visible clogs or debris. Use a multimeter to test the pump’s electrical continuity. Set the multimeter to the lowest ohm setting. Touch the probes to the pump terminals. A reading of zero or infinity means the pump is faulty.
If the pump shows continuity, remove any obstructions. Reconnect the washer to power and run a drain cycle. Listen for unusual noises or vibrations. If the pump still doesn’t work, it may need replacement.
By checking the drain pump, you can save time and money on repairs. Ensure your LG washer drains properly and keeps your laundry routine hassle-free.
Examining The Door Lock
When an LG washer is not draining, the door lock can be a culprit. A faulty door lock can stop the washer from draining water. Let’s look at the door lock mechanism and how to ensure it closes properly.
Door Lock Mechanism
The door lock mechanism ensures the washer door is securely closed. It prevents water from leaking during the wash cycle. The lock engages automatically when the washer starts. If the lock is broken, the washer might not drain water.
Inspect the door lock for visible damage. Check if it clicks when you close the door. A silent lock might need replacing. Also, ensure the lock is clean and free from debris. Dirt can prevent proper locking.
Ensuring Proper Closure
Proper closure of the washer door is vital. A door that doesn’t close well can cause draining issues. Check the door seal for wear and tear. A damaged seal can prevent the door from closing tightly.
Make sure the door hinges are aligned. Misaligned hinges can stop the door from closing properly. Gently push the door to see if it fits snugly. If it doesn’t, adjust the hinges or seek professional help.
Finally, test the door lock. Close the door and start a wash cycle. If the door locks and the washer begins to drain, the issue might be resolved. If not, further inspection may be needed.
When To Call A Professional
When your LG washer is not draining, it can be frustrating. Some issues can be fixed easily at home. Sometimes, it’s best to call a professional. Here, we will discuss when you should call for help.
Persistent Issues
If your washer has persistent draining issues, it may be time to call a professional. You may have tried cleaning the filter and checking the hose. Yet, the problem still exists. This means there could be a deeper issue. A professional can diagnose and fix this.
Another sign is if the washer keeps stopping mid-cycle. This could point to a faulty pump. A professional can inspect and replace the pump if needed. Do not ignore these signs. They could lead to bigger problems down the road.
Complex Repairs
Some repairs are too complex for DIY. If you need to replace the pump, motor, or control board, call a professional. These parts require special tools and skills. Trying to fix them yourself can cause more damage.
Professionals have the right tools and knowledge. They can fix the issue quickly and safely. This can save you time and stress. Plus, they can provide a warranty on their work.
Here are some repairs that need a professional:
- Replacing the drain pump
- Fixing electrical issues
- Repairing the control board
If your washer needs any of these repairs, call an expert. They will ensure the job is done right.
Frequently Asked Questions
Why Is My Lg Washer Not Draining?
Your LG washer might not be draining because of a clogged drain hose or filter. Check them for blockages.
How Do I Fix My Lg Washer Not Draining?
First, check the drain hose and filter for clogs. Clean them if necessary. This often solves the issue.
Can A Blocked Pump Cause Draining Issues?
Yes, a blocked pump can prevent your LG washer from draining. Inspect and clean the pump to fix it.
What Should I Do If My Lg Washer Won’t Drain?
Ensure the drain hose and filter are not blocked. Clean them if needed. This usually helps.
Is It Safe To Use My Washer If It Won’t Drain?
No, using a washer that won’t drain can cause damage. Fix the draining issue first.
Conclusion
Fixing an LG washer that won’t drain can be simple. Start by checking the filter and drain hose. Regular maintenance helps prevent future issues. Follow the steps outlined above to troubleshoot problems. If issues persist, contact a professional. Keeping your washer in good condition saves time and money.
Always refer to the manual for specific instructions. Proper care ensures your washer runs smoothly. Don’t let a minor problem cause frustration. With these tips, you can solve drainage issues quickly. Happy washing!