If your LG washer is showing the FE error code, you’re probably wondering what it means and how to fix it quickly. The FE code usually signals that your washer is overfilling with water or struggling to drain properly.
This can interrupt your laundry routine and cause frustration. But don’t worry—you can troubleshoot this issue yourself before calling a technician. You’ll learn simple, step-by-step solutions to clear the FE error, from checking hoses and filters to resetting your machine.
By the end, you’ll know exactly what to do to get your washer back to working smoothly. Keep reading to save time, avoid unnecessary repairs, and protect your LG washer from further problems.
Fe Error Causes
The FE error code on an LG washer signals a water overflow problem. This error stops the washer to prevent damage caused by excess water. Several issues can trigger this error. Understanding the main causes helps in quick troubleshooting and repair.
Water Overflow Issues
Water overflow happens when the washer fills with too much water. This may result from a stuck water inlet valve or incorrect water level sensor readings. Overflow can cause leaks or even flooding around the machine. Immediate action is necessary to avoid water damage.
Drainage Blockages
Blocked drains prevent water from leaving the washer properly. Clogs in the drain hose or pump filter cause water to remain inside the drum. This leads to an overflow error as the machine thinks it is still filling. Cleaning the drain paths often solves this problem.
Faulty Water Inlet Valve
The water inlet valve controls water flow into the washer. A faulty valve may stay open, letting in too much water. This causes the tub to overflow and triggers the FE error. Replacing the valve usually fixes the issue and stops the error code.
Pressure Sensor Problems
The pressure sensor detects water levels inside the washer. If its hose is blocked or damaged, the sensor sends wrong signals. This can make the washer fill beyond the safe limit. Checking and cleaning the pressure sensor hose can clear this error.
Credit: www.lg.com
Initial Reset Steps
Starting with the initial reset steps helps clear the FE error on your LG washer. These steps reset the machine’s control board and remove minor blockages. Follow these simple actions before seeking professional help. They often solve the problem quickly and safely.
Unplugging The Washer
First, unplug the washer from the power outlet. This stops all electrical functions and resets the control board. Leave it unplugged for about five minutes. This pause allows the machine’s system to clear any temporary errors. After waiting, plug it back in and check if the FE code is gone.
Manual Water Drain
If water remains in the drum, drain it manually. Locate the drain pump filter, usually behind a small panel at the washer’s base. Open it carefully and let the water flow into a shallow pan. Removing standing water prevents false error signals. You can also run a drain or spin cycle to clear excess water.
Running A No-detergent Cycle
Run a quick wash cycle without detergent next. Excess soap suds can confuse the water level sensor and cause the FE code. Use only high-efficiency detergent in future washes to avoid this problem. This no-detergent cycle rinses out any leftover soap and helps reset the water level sensor.
Cleaning And Inspection
Regular cleaning and inspection help prevent the LG washer FE error code. Dirt, debris, or blockages often cause water overflow or sensor issues. Performing simple maintenance tasks can save time and avoid costly repairs.
Check important parts like the drain pump filter, inlet hose filters, and pressure sensor hose. These areas tend to accumulate debris and affect washer performance. Proper cleaning and inspection keep your machine running smoothly.
Drain Pump Filter Cleaning
Locate the drain pump filter behind the lower front panel. Open the panel carefully to avoid water spills. Remove the filter and clean out any lint, coins, or debris. Rinse the filter under running water before reinstalling. A clean filter ensures proper draining and prevents the FE error.
Inlet Hose Filter Check
Turn off the water supply before disconnecting the inlet hoses. Check the small filters inside the hose connectors for dirt or buildup. Remove any debris with a soft brush or cloth. Clean filters help maintain steady water flow and avoid sensor errors.
Pressure Sensor Hose Inspection
Find the pressure sensor hose inside the washer, usually connected to the tub. Inspect the hose for kinks, cracks, or blockages. Blow air gently through the hose to clear any clogs. A clear and intact hose allows accurate water level detection, reducing FE code problems.
Credit: www.youtube.com
Diagnostic Tools
Diagnostic tools simplify finding the cause of the LG washer FE code. These tools help you check the machine’s functions and parts. Using them can save time and avoid unnecessary repairs. Below, learn how to run a diagnostic cycle and understand error codes.
Running Diagnostic Cycle
Start by unplugging the washer for safety. Wait a few minutes, then plug it back in. Some LG washers have a special diagnostic mode. This mode tests the water level sensor, valves, and other parts.
To enter this mode, press certain buttons as your manual says. The washer will run through checks and show error codes. These codes point to specific problems. Running this cycle helps you spot issues early.
Interpreting Error Codes
Error codes appear on the washer’s display panel during or after the diagnostic cycle. The FE code means the washer detects too much water inside. This could mean a problem with the water level sensor or water inlet valve.
Other codes may show issues with drainage or sensors. Use your user manual to match codes with problems. Understanding these codes guides your next steps. It tells you what to fix or if you need a technician.
When To Call A Technician
Knowing when to call a technician for an LG washer FE code error is crucial. Some issues can be fixed at home. Others need professional help to avoid damage or injury.
Persistent FE errors after basic checks signal deeper problems. A technician has the tools and knowledge to diagnose and repair these safely. Below are common repairs requiring expert service.
Water Inlet Valve Replacement
The water inlet valve controls water flow into the washer. A faulty valve can cause overfilling or leaks. If your washer keeps showing the FE code and water is overflowing, the valve may need replacement.
Technicians test valve function and replace it if needed. This repair involves handling electrical parts and water lines. Incorrect repair may cause further issues or water damage.
Water Level Sensor Repair
The water level sensor detects how much water is in the drum. A broken sensor sends wrong signals, triggering the FE code. Cleaning or fixing the sensor hose can help, but sensor replacement often requires a technician.
Experts check the sensor and hoses for clogs or damage. They replace faulty parts to restore proper water level detection and prevent errors.
Control Board Issues
The control board manages washer functions and error codes. A malfunctioning board may wrongly show the FE error. Diagnosing control board problems requires special tools and experience.
Technicians inspect circuit boards and wiring. They repair or replace the control board to ensure the washer runs correctly without false error codes.
Preventive Tips
Preventing the LG washer FE code saves time and avoids repair costs. Simple steps keep your washer running smoothly. Regular care helps detect problems early. Follow these tips to reduce the chance of error codes.
Using Proper Detergent
Choose only high-efficiency (HE) detergent for your LG washer. Regular detergent creates excess suds. Suds can confuse the water level sensor. This leads to the FE error code. Always measure detergent carefully. Avoid using too much soap. Excess detergent causes buildup inside the machine. This buildup blocks sensors and hoses. Use the right detergent to keep the washer clean and error-free.
Regular Maintenance Routines
Clean the drain pump filter every month. Remove any lint, coins, or debris. Check water inlet filters to prevent clogs. Inspect hoses for kinks or damage. Replace worn or cracked hoses quickly. Run a maintenance cycle using no detergent. This helps flush out residue inside the drum. Wipe the door seal to stop mold growth. Regular upkeep ensures all parts function well. This prevents water level sensor errors and overflow issues.
Credit: www.lg.com
Frequently Asked Questions
How To Solve Fe Error In Lg Washing Machine?
Unplug the LG washer and reset it. Clean the drain pump filter and inlet hose filters. Check for blockages or a faulty water inlet valve. Inspect the pressure sensor hose. Call a technician if the FE error persists after these steps.
What Does Fe Mean On A Washer Machine?
FE on a washer means water overflow or leakage error. It indicates the washer is overfilling or draining improperly. Check the drain pump filter, inlet hoses, and pressure sensor hose for clogs or damage. Reset the machine by unplugging it.
Persistent issues may need professional repair.
How Do I Clear The Code On My Lg Washer?
Unplug your LG washer to reset it. Drain any standing water and clean the drain pump filter. Check and clean inlet hose filters and inspect the pressure sensor hose. Run a no-detergent cycle to clear excess suds. Contact a technician if the FE code persists.
What Is The Fe Code On My Lg Dishwasher?
The FE code on your LG dishwasher indicates a water overflow or leak issue. Check for clogs, clean filters, and inspect the water inlet valve and pressure sensor. Reset the machine by unplugging it. Call a technician if the error persists after these steps.
What Does The Lg Washer Fe Code Mean?
The FE code signals a water overflow or water level sensor issue in LG washers.
Conclusion
The LG washer FE code signals a water overflow issue. Start by unplugging the washer and resetting it. Check and clean the drain pump filter and inlet hose filters. Use the right detergent to avoid suds buildup. Inspect the pressure sensor hose for blockages or damage.
Run a diagnostic cycle if available. Persistent errors usually mean a faulty part. In that case, call a professional for a proper inspection and repair. Taking these steps helps keep your washer running smoothly.