Is your Avital car starter not working when you need it most? It’s frustrating, especially when you rely on that remote start to warm up your car or cool it down before you even step inside.
But don’t worry—you’re not alone, and this problem often has simple solutions. You’ll discover the common reasons why your Avital remote start might fail and easy steps you can take to get it working again quickly. Keep reading to avoid costly repairs and get back to enjoying the convenience of your remote starter.
Common Reasons For Failure
Understanding the common reasons why your Avital car starter is not working can save you time and frustration. Many issues stem from simple safety checks or small component failures. Knowing these causes helps in quick troubleshooting and possible fixes. Below are frequent problems that prevent your remote start from functioning properly.
Key Fob Battery Issues
A weak or dead battery in the key fob is the top cause. The fob sends signals to the car, so if the battery dies, the car won’t receive commands. Replacing the key fob battery often solves this problem immediately.
Hood Latch Sensor
The remote start system checks if the hood is closed. A faulty hood latch sensor or an unlatched hood stops the car from starting remotely. Always ensure the hood is fully closed and the sensor is working correctly.
Transmission Position
Your vehicle must be in Park (P) for the remote starter to work. If the transmission is in any other gear, the system disables remote start as a safety precaution. Double-check the gear before using the starter.
Hazard Lights Impact
Activated hazard lights prevent the remote start from engaging. This safety feature ensures your car does not start while warning lights flash. Turn off the hazard lights and try again to start your car remotely.
Check Engine Light
An illuminated check engine light often disables remote start. The system detects trouble codes and blocks starting to protect the engine. Addressing the engine issues and clearing the codes can restore remote start functionality.
Security System Conflicts
Your car’s security system may interfere with the remote starter. If the alarm is triggered or the system senses a threat, it stops the remote start from working. Resetting or disabling the security system temporarily might help.
Quick Fixes To Try
When your Avital car starter is not working, some quick fixes might solve the problem fast. These simple steps often help you get your remote start working again without much hassle. Try these quick checks before seeking professional help. They cover common issues that stop your car starter from working properly.
Replace Key Fob Battery
A dead or weak battery in your key fob often causes remote start failure. Replace the battery with a new one matching the original type. This fix is simple and can restore your remote start function immediately.
Ensure Hood Is Closed
The car’s safety system disables remote start if the hood is open. Check the hood latch and close it firmly. A properly closed hood allows the starter to engage safely.
Put Car In Park
Remote start will not work unless the car is in Park. Confirm the gear shift is in the “P” position. This safety feature prevents accidental movement of the vehicle.
Turn Off Hazard Lights
Hazard lights can block the remote start system from activating. Make sure your hazard lights are off before trying the remote start again. This step clears a common safety lockout.
Cycle Ignition Key
Turn your ignition key on and off a few times. This resets the car’s electronics and may clear any temporary glitches. It prepares the system for the remote start command.
Remove Key From Car
Ensure the key fob is outside the vehicle. Some systems refuse to start if the key is inside. Take the key out and try the remote start again to see if it works.
Advanced Troubleshooting
Advanced troubleshooting helps solve complex issues with your Avital car starter. It goes beyond simple fixes and digs deeper into possible causes. This approach saves time and avoids unnecessary repairs.
Follow these steps carefully to identify hidden problems. Each check focuses on a different system component. This method improves your chances of restoring the remote start function.
Check For Diagnostic Codes
Use an OBD-II scanner to read diagnostic codes from the car. These codes point to issues that may block the starter. Look for codes related to the engine, transmission, or electrical system.
Clear codes after recording them, then try the remote start again. Persistent codes mean a specific fault needs repair. Visit a mechanic if you cannot interpret the codes yourself.
Inspect Main Car Battery
Check the main battery’s voltage and condition. A weak or dying battery often stops the remote starter. Measure voltage with a multimeter; it should read around 12.6 volts when off.
Look for corrosion on battery terminals and clean if needed. Tighten loose connections to ensure good contact. Replace the battery if voltage is low or it fails a load test.
Monitor Fluid Levels
Verify engine fluids like coolant and oil. Low coolant or oil pressure may prevent the starter from activating. The system protects the engine from damage by disabling start.
Check fluid levels using dipsticks and reservoir marks. Top up fluids if they are below recommended levels. Maintain regular service to avoid fluid-related issues.
Reset Remote Starter System
Resetting the remote starter can fix software glitches. Disconnect the car battery for about 10 minutes to clear system memory. Reconnect the battery and test the remote start function.
Follow the manufacturer’s instructions to reset the remote starter module if available. This step often resolves communication errors between components.
Resetting Your Car Starter
Resetting your Avital car starter can solve many common issues quickly. The process clears errors and refreshes the system. It often restores remote start functions without needing a mechanic. Follow the simple reset methods below to get your starter working again.
Key Cycle Reset Method
Insert your car key into the ignition. Turn it to the “On” position without starting the engine. Leave it on for about 10 seconds. Then turn the key to “Off” and remove it. Repeat this cycle three times. This resets the car’s starter system and clears minor faults.
Using Programming Button
Locate the programming button inside your car, often under the dash. Press and hold the button for 10 seconds until the car’s lights flash. Release the button and wait for the system to reset. This method reprograms the starter and can fix communication issues.
Remote Button Sequence
Stand near your vehicle with the remote fob. Press the lock button three times rapidly. Then press the remote start button once. The car should respond with lights or engine noise. This sequence resets the remote starter and syncs it with your vehicle.
When To Seek Professional Help
Knowing when to seek professional help for your Avital car starter saves time and prevents further damage. Some problems go beyond simple fixes and require expert tools and skills. Professionals can diagnose hidden issues accurately and restore your remote start system effectively.
Persistent Software Issues
Software glitches may cause your remote starter to fail repeatedly. Resetting the system might not fix these problems permanently. Professionals use specialized software to update and repair the system’s programming. This ensures smooth and reliable operation of the starter.
Dealer Reprogramming Needs
Sometimes the remote starter needs reprogramming from the dealer. This happens after battery replacement or electrical repairs. Dealers have the right equipment to sync your key fobs and starter system. Attempting this at home might cause more issues.
Complex Security System Errors
Your car’s security system can block the remote starter for safety reasons. Complex error codes may trigger this lockout. Professionals can access these codes and clear errors safely. They ensure the security features work without stopping your remote start.
Frequently Asked Questions
What Causes A Remote Car Starter To Stop Working?
A remote car starter stops working due to dead key fob battery, open hood, car not in Park, active Check Engine Light, or weak car battery. Hazard lights on or security system issues can also disable it. Check these before seeking professional help.
How Do I Reset My Car Remote Starter?
To reset your car remote starter, replace the key fob battery, close all doors and hood, turn off hazard lights, and cycle the ignition key. Check for any warning lights and consult your owner’s manual or dealer for specific reset instructions.
Why Is My Car Starter Not Working?
Your car starter may not work due to a dead key fob battery, unlatched hood, car not in Park, active Check Engine Light, weak main battery, or security system issues. Check these basics and consult your manual or dealer if problems persist.
How To Start A Car With Avital Remote Start?
Press the lock button, then press and hold the remote start button for 3 seconds. Ensure the car is in Park and hood is closed. Replace the key fob battery if needed. Turn off hazard lights and check for any warning lights before starting.
Why Won’t My Avital Car Starter Remote Start The Car?
The key fob battery might be dead or weak. Also, the car must be in Park with the hood fully closed for safety.
Conclusion
Avital car starter issues often stem from simple problems. Check the key fob battery and ensure the hood is fully closed. Confirm the car is in Park and hazard lights are off. Look for any warning lights on the dashboard.
Sometimes, the car’s main battery or software needs attention. Start with these easy steps to save time and frustration. If problems persist, consult your car manual or a trusted mechanic. Staying calm and methodical helps get your remote starter working again.